The Meta Precision catalog identifies XDN-18T as a dog tooth. Meanwhile, College Sewing publishes the crossover 13814005 = XDN18T for the models Jack A4E and A7. These relationships help identify the replacement part, but the fit of the provided part must be verified by measuring it and installing it. www.miketony.com.tw
The relationship between DF2839A and XDN18T This corresponds to Orduz's purchasing experience; a catalog that directly documents this cross-reference has not yet been found. Therefore, we recommend comparing the part before substituting one part number for another.
Long-stroke semi-heavy-duty tooth
This product is marketed under the name long-haul medium-duty truck. To select the correct part, you must consider the machine model, the installed plate, the workpiece material, and the dimensions of the previous replacement part.
This designation does not mean that the tooth alone increases the stitch length or transforms a lightweight machine into a heavy-duty machine. The effective stroke depends on the machine's mechanism and configuration.
Features You Should Compare
The product image shows a metal body with rows of teeth, a central opening, and two mounting holes. Before purchasing, check the overall length and width, the distance between the centers of the holes, the mounting height, and the spacing of the teeth.
It is also important to verify that the conveyor matches the openings in the needle plate. A similar part number or appearance does not guarantee that the replacement part can be installed without interference.
When Should It Be Replaced?
A damaged tooth can contribute to irregular fabric feed. However, if the fabric is not feeding properly, you should also check the presser foot pressure, the cleanliness of the feed mechanism, the height of the feed dog, and the feed settings.
Before replacing the part, check for worn edges, burrs, dents, or deformations. A technical inspection helps identify the cause of the problem and avoid unnecessary replacements.
Installation and Maintenance
Turn off and unplug the machine before working on it. Install the replacement part according to the manufacturer's instructions and check its position relative to the needle plate. Height and synchronization adjustments must be made with the appropriate knowledge and tools.
After assembly, turn the handwheel manually to check for any friction. Perform a test run at low speed on a scrap piece of the material you'll be using, and check the feed rate before starting production.
Contents of the Purchase
Delivered a DF2839A medium-duty drag tooth, according to the presentation shown. It does not include the needle plate, presser foot, screws, or the machine itself.
At Orduz USA You can check the application by submitting the complete model number of the equipment, photos, and measurements of the previous part. Internal inventory location: #6.
Vertical Blades for Eastman-Style Fabric Cutters | Find the Right Size for Your Machine | ORDUZ USA®












There are no reviews yet.