The Singer sewing machine needle plate, part number 359839-900 It is a part that forms part of the work surface located beneath the presser foot. Its function is to support the fabric during sewing and allow the needle and feed dogs to pass through the corresponding openings. It is also known as sheet metal, sewing plate o family memorial plaque.
A plate in good condition provides a uniform support surface for the material. In addition, its reference lines serve as a guide when sewing and help maintain even seam allowances. The shape of its openings must correspond to the sewing and feed system of the machine on which it will be installed.
Functions of the needle plate
While the machine is running, the drive teeth protrude through the slots in the plate to move the fabric. At the same time, the needle passes through the material via the opening provided for its path. Proper alignment between these parts is important for the mechanism to operate without interference.
The Singer part number 359839-900 It must be selected based on its part number and design, comparing it to the original replacement part. It is not enough for a plate to look similar: the position of the mounting points, the dimensions, and the openings may vary between models.
When should it be replaced?
It is recommended that you inspect the presser foot if it shows signs of needle marks, burrs, warping, or damage in the areas where the thread passes. A damaged edge can snag the thread or fabric and affect the stitching. If you notice deep marks around the needle opening, you should have the machine inspected before continuing to use it.
Thread breaks, tangles, and irregular stitches can also have other causes. Before replacing the plate, check the condition and placement of the needle, the threading, the bobbin, and the cleanliness of the mechanism. If the needle repeatedly strikes the plate, you must identify the cause to prevent the new replacement from being damaged again.
Compatibility and Selection of Replacement Parts
Before buying the needle plate 359839-900, make sure this part number matches your Singer machine. Compare the original part with the product photos and check its outline, the grooves on the feed dogs, and the mounting points.
This is not a universal plate for all Singer machines. To check for compatibility, please provide the full model number of your device and, if possible, a photo of the installed board or the removed part. You can also consult your machine's manual or parts diagram.
Installation and Maintenance
Turn off and unplug the machine before removing or installing the panel. Follow the manufacturer's instructions and avoid forcing the screws or snap-fit connections. Take advantage of this inspection to remove lint and loose threads with a suitable brush.
After installing it, manually and carefully check to make sure the needle does not touch the plate and that the feed dogs move freely. Test it on a scrap piece of fabric before working on a garment.
At Orduz You can check via the Singer needle plate, part number 359839-900 and ask for help identifying the correct replacement part for your sewing machine.
Spare Parts for Vertical Cutters in the United States | Orduz USA











There are no reviews yet.