Dark Light
-83%
,

TH204 / 211388 / KN43 Conical Thread Tension Spring for Pegasus W500 and Siruba | Approx. 10 × 10 mm, location #6


Quantity Price per unit
1 through 4 US$2.00
5 to 9 US$1.5.00
10 to 19 US$1.00

$12.00 $2.00

The TH204 / 211388 / KN43 conical thread tension spring It is a small replacement part used in compatible tension assemblies for sewing machines. Its conical shape, with coils of progressively increasing diameter, allows it to exert pressure within the mechanism where it is installed and help adjust the thread tension.

Also known as auxiliary tension spring, conical spring for a thread tensioner, thread tension spring o conical tension spring, is a part used during maintenance, repair, and replacement of damaged components.

Identification References

At Orduz, we categorize this product under the following part numbers and recommended applications:

  • TH204: Part number used in our catalog.
  • 211388: Recommended for use with the Pegasus W500.
  • KN43: Reference number specified for use in Siruba.

These part numbers make it easier to find the replacement part using different names. Before purchasing, compare the dimensions, shape, and spring tension with the part you need to replace. Compatibility refers to the specific assembly where it will be installed, not necessarily to all mechanisms of a machine or a brand.

Approximate dimensions: 10 × 10 mm

This spring has approximate dimensions of 10 mm high and 10 mm in diameter at its widest base. Since this is a rough guide, we recommend also checking the diameter of the smaller end, the wire thickness, and the spacing between the coils.

Two springs may look similar but exert different amounts of pressure when compressed. Therefore, while the external dimensions are part of the identification process, their behavior within the tensioner must also be taken into account.

Role within the tension system

In a compatible assembly, the spring operates under compression and transmits pressure to the mechanism's components. Depending on its location and design, it can act on the discs or other parts responsible for regulating the resistance to the passage of the thread.

Its operation depends on the overall condition of the assembly. A deformed, incorrect, or worn-out spring can affect the tension response. However, tension problems can also be related to the threading, the discs, the guides, accumulated dirt, or other components.

Multi-purpose replacement part

Due to its size and configuration, this type of spring can be used in various locations and mechanisms that require a part with equivalent characteristics. Its suitability must be verified on a case-by-case basis.

The term “universal” refers to the fact that this part can be used in various compatible assemblies. It does not mean that it can be installed in any machine or that it replaces all tension springs. To select the correct part, check the previous part or consult the equipment’s exploded view.

When to Inspect or Replace the Spring

It is advisable to inspect it if it shows signs of deformed coils, corrosion, breaks, or difficulty returning to its original shape. It should also be checked if the tensioner adjustment does not respond evenly.

During maintenance, check the contact surfaces and other components of the assembly. Avoid stretching, cutting, or modifying the spring to make it fit, as this can alter the pressure it exerts.

Installation and Testing

Turn off and unplug the machine before working on the mechanism. When disassembling it, keep track of the order and orientation of the parts. Install the spring without forcing it, and make sure it is properly seated.

After assembly, perform stitching tests and adjust the tension according to the thread, the material, and the equipment instructions. If you are unsure of the spring's position, request technical support before disassembling the unit.

Contents of the Purchase

Delivered a small conical wire tension spring, identified in Orduz with the references TH204 / 211388 / KN43. Does not include discs, knobs, screws, or the complete tensioner.

At Orduz USA You can request guidance by sharing photos, measurements, and the location where you need to install the replacement part.

whatsapp.

Vertical Blades for Eastman-Style Fabric Cutters | Find the Right Size for Your Machine | ORDUZ USA®

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Resorte Cónico de Tensión de Hilo TH204 / 211388 / KN43 para Pegasus W500 y Siruba | Aprox. 10 × 10 mm ubicación #6”

There are no reviews yet.

SHOPPING CART

close
Call Now Button